联系我们

名称:保定市玉通模具制造荣鼎彩技巧

电话:0312-8103052

手机:13303126569

微信:13303126569

邮箱:541192408@qq.com

地址:河北省保定市清苑区闫庄工业区

新闻动态
模具不允许之结构
1.模具不允许有尖钢及有高度大于2mm,厚度少于1mm之薄钢。
1. dies shall not be allowed to have sharp steel and thin steel with height greater than 2mm and thickness less than 1mm.
2.除BOSS柱外顶针不允许与前模接触。
2. the thimble is not allowed to contact the front mold except the BOSS column.
3.模具开合不允许有异常响声。
3. die opening and closing shall not allow abnormal noise.
4.型腔边缘5mm范围内不允许红丹测试不到,并且分型面红丹测试不允许低于80%。
4. Red Dan is not allowed to be undetectable within 5 mm of the cavity edge, and red Dan is not allowed to be less than 80% of the parting surface.
5.所有紧固螺丝不允许松动。
5. all fastening screws are not allowed to loose.
6.所有勾针不允许出现不同向现象。
6. all needle marks are not allowed to appear in different directions.
7.胶件不允许有粘模现象。
7. glue parts are not allowed to have sticking phenomenon.
8.模具不允许有顶出不平衡现象。
8. mold is not allowed to have ejection imbalance.
9.模具高度方向前、后模板不允许缺少拉令孔。
9. before and after the height of the die, the drawing hole is not allowed.
10.模具装配不允许漏装或装错零件。
10. mold assembly is not allowed to leak or load wrong parts.

联系方式

  1. 名称:保定市玉通模具制造荣鼎彩技巧
  2. 电话:0312-8103052
  3. 手机:13303126569
  4. 微信:13303126569
  5. 邮箱:541192408@qq.com
  6. 地址:河北省保定市清苑区闫庄工业区

版权 © 保定玉通护坡模具厂 网址:www。hupomuju。com。cn  推荐:阶梯护坡模具,生态护坡模具,塑料护坡模具